Danby DWC1534BLS - Manual (Page 7)

6
Operating Instructions
Setting the
Temperature
• To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the UP (
) and
DOWN ( ) control buttons
simultaneously for approxi-
mately five (5) seconds
• The temperature range for
both compartments can be set
as low as 39°F (4°C) or as
high as 64°F (18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the UP (
) or DOWN
( ) button will allow you to
adjust the temperature in 1°
degree increments within the
aforementioned range.
• You may view your ‘set’
temperature at any time by
briefly depressing either the
UP (
) or DOWN ( ) but-
ton. The set temperature will
flash in the display area for 5
seconds before the display
resumes showing the
current
cabinet temperature.
Please note: In the event of a
power failure or interruption,
all modified settings are lost
and the default settings are
used once power resumes.
The Controls of
your Wine Cooler
1. Run
Indicator light illuminates to
signify the cooling mode is
currently in operation.
2. Electronic Display
Dispay screen shows current
cabinet temperature and set
temperature. (see ‘Setting the
Temperature’ below)
3. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
4. ‘UP’ Button
Used to raise (warm) the temperature
in 1° degree increments.
‘DOWN’ Button
Used to lower (cool) the temperature
in 1° degree increments.
5. Interior lights on/off switch
AFFICHAGE AFFICHAGE
DISPLAY DISPLAY
RUN RUN
Activation Activation
C
F HAUT HAUT
BAS BAS
DOWN DOWN
UP UP
|
O
LIGHT LIGHT
LAMPE LAMPE
1
2
3 4
N O T E
When you plug in your wine
cooler for the first time, the
temperatures will automatical-
ly be set to 45°F (7°C) and
54°F (12°C) in the left and
right compartments respectively
and will be displayed in the
Fahrenheit scale (°F).
5