Sundance SMT784 v.1.0 - Manual (Page 16)

Version 1.0 Page 16 of 31 SMT784 User Manual
Input Format Single-ended or differential on option (3.3V LVPECL).
Frequency range 10-125 MHz
External Trigger Inputs
Input Voltage Level 1.5-3.3 Volts peak-to-peak.
Format
DC-coupled and single-ended (terminated at connector). Differential an
option (3.3 V PECL).
Impedance 50-Ohm.
Frequency range 62.5 MHz maximum
ADCs Output
Output Data Width 14-Bits
Data Format
2’s Complement or offset binary
(Changeable via control register)
SFDR 82dBs maximum (manufacturer)
SNR 70dBs maximum (manufacturer)
Min Sampling Clock 10 MHz (ADC DLL off)
Max Sampling Frequency 125 MHz (ADC DLL on)
Table 2 ADC Characteristics
Switch 1 Flash Settings
The following table represents the various switch settings for switch 1:
Table 3 Common Configurations of Switch 1
POS 4 N/A N/A N/A
POS 3 ON OFF ON
POS 2 OFF OFF ON
POS 1 N/A N/A N/A
Flash
condition
SMT784 firmware
Flash boot from user
address (0x800000)
Read/write access to
flash
SMT784 firmware
Flash boot from user
address (0x800000)
Read only access to
flash
SMT700 firmware
(Default boot at
address 0x0)
Read/write
access to flash