Using smtflash – Sundance SMT6001 User Manual
Page 3
3.
Using SmtFlash
SmtFlash is started by clicking on SmtFlash.exe in the installation directory, usually
"C:\Program Files\Sundance\6001\SmtFlash". The installation procedure also puts a
shortcut to the utility in the Start menu. Once started, the utility attempts to start Code
Composer in the background. When this has been successfully achieved, the
following window should appear:
The "Environment" section defines the module you wish to access and specifies its
type.
Carrier Board
This selects the board containing the TIM to be accessed.
Selected TIM
This selects the particular TIM on the selected board. The
names here correspond to the names used for the processors
when setting-up Code Composer.
Tim definition file
This defines a standard file that contains detailed information
about the available TIM types. This should normally find the
file SUNDANCE.TIM in the installation directory.
- SMT107 (16 pages)
- SMT6035 v.2.2 (39 pages)
- SMT6012 v.4.6 (22 pages)
- FC100 (12 pages)
- FC108 v.1.1 (10 pages)
- SMT6065 v.4.0 (45 pages)
- FFT v.2.1 (19 pages)
- SMT111 (18 pages)
- SMT118LT (10 pages)
- SMT118 (20 pages)
- SMT123-SHB (13 pages)
- SMT128 (15 pages)
- SMT145 (18 pages)
- SMT148 (35 pages)
- SMT130 v.1.0 (46 pages)
- SMT148FX (48 pages)
- SMT310Q (55 pages)
- PARS (70 pages)
- SMT166-FMC (52 pages)
- SMT166 (44 pages)
- SMT300Q v.1.6 (61 pages)
- SMT310 v.1.6 (50 pages)
- SMT317 (24 pages)
- SMT326v2 (24 pages)
- SMT338 (19 pages)
- SMT349 (32 pages)
- SMT339 v.1.3 (27 pages)
- SMT338-VP (22 pages)
- SMT358 (25 pages)
- SMT351T (37 pages)
- SMT351 (25 pages)
- SMT350 (45 pages)
- SMT362 (30 pages)
- SMT365G (23 pages)
- SMT364 (37 pages)
- SMT373 (15 pages)
- SMT368 (24 pages)
- SMT370v3 (46 pages)
- SMT377 (22 pages)
- SMT381 2007 (31 pages)
- SMT381-VP (81 pages)
- SMT387 (42 pages)
- SMT391 (18 pages)
- SMT384 (47 pages)
- SMT390-VP (55 pages)