Sundance SMT145 - Manual (Page 12)

Version 1.1 Page 12 of 18 SMT145 User Manual
Figure 2: software design
Driver
The SMT145 is supported by the SMT6300 that provides the Windows driver for the
board.
Registers
All the addressable resources are located in the BAR1.
The communication resources are presented to the host machine as X-Link
interfaces. The addresses of the X-Link and the number of X-Link are available from
the X-Link table of content.
Refer to the X-Link documentation for the description of the registers of the X-Link.
The other registers available in the firmware are the following:
Reset register (BAR1 – 0x00000000)
Writing ‘1’ to the reset register will cause the SMT145 and the TIM plugged on it to be
reset. The reset is de-asserted automatically after few milliseconds.
X-Link table of content (BAR1 – 0x00000400)
Refer to the X-Link documentation for the details of the table of content.