Sundance SMT111 - Manual (Page 14)

User Manual SMT111 Page 14 of 18 Last Edited: 21/05/2010 16:53:00
4.2.13 Jumper (JP7)
Figure 5: Jumper (JP7)
The jumper (JP7) shall NOT be removed, and remain fitted.
4.2.14 Xilinx JTAG connector
A JTAG connector is available to access the Xilinx Spartan-3 FPGA and the Xilinx
PROM devices using the Xilinx IMPACT tools.
Figure 6: Xilinx JTAG connector
Do NOT erase or reprogram the Xilinx PROM without the contentment of
.Sundance since it may alter the functionalities of the SMT111 provided
by default.