Studio Technologies 93 - Manual (Page 20)

Issue 1, January 2008 Model 93 User Guide
Page 20 Studio Technologies, Inc.
Specifications
Application: electrical testing of standard W1 cable
assemblies
Connectors:
W1 Cable Assemblies: one male and one female
39-pin circular W1-type
Fanout and XLR: one male and one female 3-pin
XLR-type
Data Link: BNC
12 Volt DC Power In: coaxial power jack, 2.1 x 5.5
mm, locking bushing, compatible with Switchcraft
S760K plug
Power Source:
Internal: 12 volt 1.3 amp-hour sealed lead-acid
battery. Operating time 8 hours minimum with fully
charged battery. Recharge time 8 hours maximum.
External: 12 volts DC nominal, acceptable range
10-15 volts DC; 250 mA minimum recommended
for operation and battery charging. Units shipped
to North America and Japan include a 120 V input/
12 Vdc output power supply.
Master/Slave Operation:
Data Link: modified LIN bus, 1200 bit/s
Maximum Distance between Units: tested to 2400
feet using Belden 1694A coaxial cable and 4000 feet
using standard CAT5E UTP
Dimensions:
Height: 5.0 inches (12.7 cm)
Width: 5.0 inches (12.7 cm)
Length: 11.0 inches (27.9 cm)
Overall Length: 12.5 inches (31.8 cm)
Weight: 5.5 pounds (2.5 kg)
Specifications and information contained in this User
Guide subject to change without notice.