Studio Technologies 78 2004 - Manual (Page 22)

Issue 5, January 2004 Model 78/79 User Guide
Page 22 Studio Technologies, Inc.
for Surround
Model 79 Configuration—Solo Mode, Power-Up Mute All, Level Control
Response, Output Level Offset, Level Control Auto Mute All, and
Output Level Range Mode
When the LFE
Low-Pass button
is pressed, these
LEDs display the
status of the solo
mode. When LED
L is lit additive solo
mode is enabled;
when LED R is lit
exclusive solo mode
is enabled. Use the
buttons to change
the configuration.
Default: Additive solo mode enabled.
Upon power up, mute all function enabled.
Level control provides modified logarithmic response.
Output level offset view only.
Level control auto mute all function enabled.
Output level range mode 1, –70 to 0 dB.
Press and hold
the LFE Low-Pass
button to display
and select the
status of the solo
mode, power-up
mute all func-
tion, level control
response mode,
output level offset,
level control auto
mute all function,
and output level
range mode.
When the LFE Low-Pass button is pressed,
these LEDs display the status of the power-
up mute all function. When LED C is lit the
state of mute all is saved at power down
and followed upon power up; when LED
LFE is lit the system is always in mute all
upon power up. Use the buttons to change
the configuration.
When the LFE Low-Pass
button is pressed, these
LEDs display the status of
the level control response
mode. When LED SL is lit
the level control provides a
true logarithmic response.
When LED SR is lit the level
control provides a modified
logarithmic response. Use
the buttons to change the
configuration.
When the LFE Low-Pass button is pressed, this LED
displays the status of the level control auto mute all
function. When the LED is lit the function is enabled.
Use the button to change the configuration.
When the LFE Low-Pass
button is pressed, these LEDs
display the status of the output
level offset function. When
LED BL is lit the output level
offset can be viewed but not
changed. When LED BR is
lit the output level offset can
be viewed and changed. Use
the buttons to change the
configuration.
When the LFE
Low-Pass button
is pressed, these
LEDs display the
status of the output
level range mode:
LED 5.1 lit means
mode 1, –70 to
0 dB; LED LCRS
lit means mode 2,
–80 to –10 dB.
Use the buttons to
select the mode.
