Studio Technologies 78 2004 - Manual (Page 19)

Model 78/79 User Guide Issue 5, January 2004
Studio Technologies, Inc. Page 19
for Surround
Note that pressing the button associated
with the center channel will always display
a level offset value of 0.0. This value is
fixed and cannot be changed. This is due
to the fact that the center channel serves
as the system reference.
Once the level offset calibration process
has been completed, exit the calibration
mode by pressing and holding the mains
mute and sub mute buttons for five sec-
onds. To prevent the level offset values
from being accidentally changed, the main
Model 79 configuration mode should be
entered and the view only mode selected.