Studio Technologies 5154 - Manual (Page 31)

Model 5154 User Guide Issue 3, September 2013
Studio Technologies, Inc. Page 31
Model 5154
Video Generator/Audio De-Embedder Module
Appendix B–DC Input/Data Interconnection Details
The required mating receptacle is from the TE Connectivity (formerly AMP) MTA-100 series
of IDC (insulation displacement) connectors. This series was selected because of its low-
cost and wide range of offerings. Separate connectors are offered for compatibility with 22,
24, 26, and 28 AWG (American Wire Gauge) insulated wire. The connector color indicates
its AWG-compatibility. Unfortunately, with flexibility can come some confusion. The MTA-100
offers a number of different connectors that will work with the DC input/data headers. Before
obtaining receptacles it’s important to determine two things: wire gauge and wiring arrange-
ment. For this application 22 AWG is recommended.
DC Input/Data
• For 22 AWG wire this receptacle (red in color) is recommended:
TE Connectivity (AMP) 3-643813-4, closed-end type
Digi-Key part number A31108-ND
Mouser part number 571-3-643813-4
TE Connectivity (AMP) 3-644540-4, feed-through type
Digi-Key part number A31122-ND
Mouser part number 571-3-644540-4
Tools for Connecting Wires to the Mating Receptacles
For applications where just a few Model 5100-Series modules are going to be installed a
manual IDC termination tool is recommended. While requiring a steady hand to achieve
reliable wire connections to the mating receptacles, the price, at less than US$40, is fairly
reasonable:
• “T Handle” termination hand tool:
TE Connectivity (AMP) 59803-1
Digi-Key part number A9982-ND
Mouser part number 571-598031