Directed Electronics 64602610 400.2 User Manual

Page 14

SPECIFICATIONS

RMS continuous power per channel, both chan-
nels driven into 4 ohms from 20 to 20,000 Hz,
with less than 0.08% Total Harmonic Distortion
@ 14.4 VDC
RMS continuous power per channel, both chan-
nels driven into 2 ohms from 20 to 20,000 Hz,
with less than 0.1% Total Harmonic Distortion @
14.4 VDC
RMS continuous power bridged into a 4 ohm
load from 20 to 20,000 Hz, with less than 0.1%
Total Harmonic Distortion @ 14.4 VDC
Dynamic power rating (IHF-202 Standard)
bridged into 4 ohms

25 watts

200 watts

400 watts

550 watts

Viper model

400.2

Signal-to-Noise Ratio

Greater than 95 dB

Frequency Response

20-20,000 Hz ± 0.5 dB

Damping Factor @ 4 ohm

Greater than 200

Crossover

Switchable high or low pass
12 dB/octave, continuously
variable from 50 to 500 Hz

Bass Equalization

Variable 0-12 dB

Input Impedance

20K ohms

Input Sensitivity

Variable from 150 mV to 8 volt

Output Impedance

2 to 8 ohms, stereo
4 to 8 ohms, bridged

Supply Voltage

10 to 16 VDC

Fusing and Power

40A

Minimum Cable Requirements (AWG)

(Per amp, trunk mounted)