Studio Technologies 76DA V.4.02 - Manual (Page 26)

Issue 4, March 2013 Model 76DA/77 User Guide
Page 26 Studio Technologies, Inc.
for Surround
Address
Dim LED Reference Level LED
A1 OFF OFF
A2 OFF ON
A3 ON OFF
A4 ON ON
Figure 9. Model 71 Device Address Chart
Figure 8. Model 71 Control Console Front and
Back Panels
units will continue. When a Model 71 en-
ters its configuration mode its three LEDs
will no longer perform their usual functions.
Instead the status LED will blink to indi-
cate that configuration mode is active. The
dim and reference level LEDs will display
the Model 71’s current device address.
The rotary level control is used to select
the desired device address; the LEDs will
respond accordingly.
To leave the configuration mode and return
a Model 71 to normal operation requires
one last action: again press and hold its
configure button for two seconds. The
selected device address will be stored in a
nonvolatile memory device that is located
inside this specific Model 71.