Studio Technologies 76D 2014 - Manual (Page 29)

Model 76D/77 User Guide Issue 11, May 2014
Studio Technologies, Inc. Page 29
for Surround
Configuration—Sync Source, Sync Input Termination,
Audio-Synced-to-Video Sample Rate, and Monitor Output Types
Default: Sync source is L/R of currently selected input.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Pre-fader surround/stereo input C direct monitor output type balanced AES3 (110 ohms/5 Vpp).
Post-fader surround/stereo monitor output type balanced AES3 (110 ohms/5 Vpp).
Use the Channel Solo C and LFE buttons to
select the pre-fader surround/stereo input
C direct monitor output type. C LED lit
means unbalanced AES3 (75 ohms/1 Vpp);
LFE LED lit means balanced AES3 (110
ohms/5 Vpp). Use the buttons to change the
configuration.
Use the level control to adjust the audio-
synced-to-video sample rate. Available
sample rates are 32, 44.1, 48, 88.2, 96,
176.4, and 192 kHz.
This LED displays the configura-
tion of the sync input termination.
LED not lit means sync input is not
terminated; LED lit means termi-
nated with 75 ohms. Use the button
to change the configuration.
Use the Channel Solo LS and RS
buttons to select the
post-fader
surround/stereo monitor output
type. LS LED lit means unbalanced
AES3 (75 ohms/1 Vpp); RS LED lit
means balanced AES3 (110 ohms/
5 Vpp). Use the buttons to change
the configuration.
Use these buttons
to select the sync
source.
LED Surround B
lit means sync
input, video;
LED Stereo A lit
means sync input,
DARS;
LED Stereo B lit
means sync input,
word clock;
LED Stereo C
lit means L/R of
currently selected
input.
Press and hold
the Stereo to
Mono button
to display and
select the sync
source, sync in-
put termination,
audio-synced-
to-video-sample
rate, and moni-
tor output types.
