Soundtube RF31-EZ - Manual (Page 2)

1. Unpack speaker.
2. Connect speaker wires to
signal wires using included
wire nuts.
6. Done!
3. Install the RF31-EZ into
the installer supplied
junction box using included
fasteners.
RF31-EZ Installation Instructions For:
RF31-EZ speaker
1.435.647.9555 | 800.647.TUBE | www.soundtube.com
1.
2.
4. Attach grille safety clip
by placing the large end of
the clip over snap-fit post
(1), then sliding clip until
small end snaps into place
around post (2). 5. Align tabs on snap-fit
grille with slots in baffle,
gently press grille into place.