Soundtube XT-RockSolid - Manual

Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Box contents
1 XT-RockSolid-2 unit with drivers and transformer
4 All-weather wire nuts
1 Base plate bolt (¼-20) and Allen wrench
1 Structural base plate
1 Anti-theft bracket
Installation Note
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN INS-XT-RockSolid Rev 02.24.10
Anti-theft bracket
1/4-20 Base plate bolt
Structural base plate
Transformer
XT-RockSolid unit
To ensure the best sound quality, installer
should eliminate any gaps between the base
of the XT-RockSolid unit and the mounting
surface. To remove gaps in the in-ground
installation, bury the unit 1/2" deep with
backfill material (sand, dirt, bark mulch, etc.).
Install Instructions For:
XT-RockSolid 2
XT-RockSolid ™