Soundtube SM890i User Manual

Sm890i, Warning

Box contents

1 Speaker
1 Terminal weather boot
1 Mounting bracket
1 Safety cable
1 Euroblock connector
1 5 mm Allen hex key
1 Paint mask

Install Instructions For:

SM890i

1.435.647.9555

800.647.TUBE

www.soundtube.com

Clamp knob

Mounting bracket

Tap switch

Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.

Warning

SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.

Grille

Grille retention knob

Terminal weather boot

Euro block

Signal wire

SM890i

Rotatable horn

To replace horn assembly,

insert horn 1/8 turn from final
position and rotate clockwise to
tighten. Horn is fully engaged
when horn baffle throat is
aligned with speaker.

Attach grille by pressing down

gently and rotating the retention
knob clockwise to vertical postion.
Grille retention knob will snap into
the matching recess in the grille
when fully engaged.

To release the horn, insert

hand into horn throat and twist
horn assembly counter-clockwise.

To remove the grille, rotate

the grille retention knob
counter-clockwise while gently
pushing down on the grille.
Remove the grille from the
speaker by pulling gently on the
grille retention knob.

The SM890i has a rotatable horn for 85° or 110° coverage.

Speaker ships in the 110º vertical (85º horizontal) position. To change to
85º vertical (110º horizontal), follow these directions:

110º

100v

70v

25v

6 Direct Direct Direct
5 X 150

4 150

3 75

2 38

2.5

1 19

1.3

Tap Setttings

85º

110º

85º