Soundtube LA880i - Manual (Page 5)

2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
1. Unpack speaker. 3. Attach AC-LA8-FLY hanging
adapter plate(optional accessory)
to left andright sides of speaker
using bolts supplied with
accessory kit.
4. Hang the Allen Products
One-Way-Array bracket from the
structure. Installation location
and hanging hardware must be
sufficiently strong to reliably hold
the speaker. See Allen Products
installation manual for more
details.
5. Attach speaker to One-Way-
Array bracket using Allen
Products flying hardware.
Cables should connect to
hanging adapter plates at the
top, and back plate near the
bottom of the cabinet.
6. Attach included safety cable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the end of the cable into
the SpeakOn input connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 | 800.64 7.TUBE | www.soundtube.com Flown Instructions
WARNING: Flown products must only be installed by trained rigging professionals.