SoundTraxx TSU-IM1000 - Manual (Page 6)

Tsunami User’s Guide for the TSU-IM1000 Digital Sound Decoder Page 3
Function Mapping Tables
CVs 33 – 46 allow you to customize which DSD outputs or sound effects are
controlled by which function keys. Each function input, F0 through F12, is
assigned a unique CV that allows the corresponding function control to be
redirected to up to 14 different DSD function outputs or sound effects. This
allows a single function key to control more than one output, if desired.
The F0 function has two CVs – one for forward direction and one for reverse.
Function outputs mapped to these registers will be directional unless the
same output is mapped to both F0 CVs.
Note: All function inputs cannot be mapped to all outputs. Tables A and B
graphically indicate which inputs can control which outputs based on the
locomotive being used. In each table, bold numbers indicate default values.
Also note that Tables A and B are specific to TSU-IM1000 decoders and
contain slightly different values than those in the Function Mapping Table
provided in the Tsunami Diesel Technical Reference.
Operation