SONOSAX SX-ES64 - Manual (Page 7)

User manual SONOSAX SX-ES64 Page 7 of 27
4. MIC/LINE INPUT SECTION
This section covers all functionalities concerning the input channels such as the input gain, the sweep LF-Cut,
the mixing level and the assignment to the mix bus. It also contains a small modulometre to control the pre-
fader level and to indicate the eventual overloads and the limiter activity.
Dynamic / 48V Phantom
Pre LF Cut filter
8kHz High frequency shelf +/- 15dB
Reverse Polarity
Mid sweep frequencies 200 to 8kHz
Mid frequencies level +/- 15dB
GAIN Trim +/- 20dB
80Hz Low frequency shelf +/- 15dB
GAIN coarse preset 40 / 12 / 60dB
Sweep LF Cut 20 to 350Hz 12dB/octave
Routing selectors to assign
channel to Mix busses1 to 4
PAN Potentiometer
Limiter Threshold
3 Led peak-meter for Level
Limiter and overload indications
100mm Linear Fader
PFL push button