SONOSAX SX-ES64 - Manual (Page 27)

User manual SONOSAX SX-ES64 Page 27 of 27
9. TIPS ON USING YOUR MIXER
The SONOSAX SX-ES64 has been designed to offer outstanding performances. However, bear in mind that a
good sound recording greatly depends on microphone placement and on dynamics.
We therefore recommend the following:
• Adjust the input gain level at maximum possible level, reading between 0 dB and +6 dB on the main
meters, but keep a reasonable headroom.
• Input faders should act between 0dB and +10dB.
• Preferably try to operate at highest possible levels at the first amplification stage or at microphone pre-
amp levels.
• Make sure that interconnections between your SX-ES64 mixer and other equipments are correct and
optimal.
• Optimize operating conditions (location, quality of microphones, etc.)
Considering the extensive possibilities offered by your SONOSAX SX-ES64 mixer, this instruction manual
may not answer all questions that may arise during normal operation of your equipment. Please contact your
nearest SONOSAX dealer for any further information.
The information contained in this manual is subject to change without notice.
All specifications mentioned in this manual apply to standard models only.
SONOSAX SAS SA reserves the right to modify these characteristics at any time without prior notice.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical including photocopying and recording of any kind, for any purpose, without the express
written permission of SONOSAX SAS SA.
© 2003 SONOSAX SAS SA, Ch. de la Naz 38, 1052 Le Mont s/Lausanne, Switzerland.
Phone: +41 21 651 0101, Fax: +41 21 651 0109, Email: [email protected] Web: www.sonosax.ch