SONOSAX SX-ES64 User Manual
Page 25
User manual SONOSAX SX-ES64
Page 25 of 27
8.
SPECIFICATIONS
All specifications mentioned below are given for standard models. SONOSAX SAS SA reserves the right to
change these data at any time without notice
For measurements and/or adjustment, the reference is: 0dBu = 0.775V (+6dBu = 1.55V, +4dBu = 1,23V)
Summary of characteristics
Overall Bandwidth:
+/-1dB 30Hz to over 200kHz (-3db @ 25Hz / -3dB @ 300kHz)
Maximal Gain:
92dB
Overall Dynamique range:
input / output at 0dB of gain => 113dB
Crosstalk:
lower
than -120dB between channels
Modulometer:
Peak IEC-268-10 type 1
Working temperature
:
-25°C [-13°F] to 70°C [158°F]
GAIN
92dB 76dB 56dB 36dB 16dB 0dB
Nominal level:
-86dBu
-70dBu -50dBu -30dBu -10dBu +6dBu
Maximum level:
-68dBu
-51dBu
-24dBu -4dBu +8.5dBu
+21dBu
THD+N 0.3%
0.05%
0.02% 0.01% 0.01% 0.01%
CMRR**
>80dB >80dB >80dB >80dB >70dB >60dB
Noise LIN**
-128.0dBu
-128dBu
-128.0dBu
-124dBu -102.7dBu -93dBu
* 22 Hz to 22 kHz, at maximum input level
** Equivalent input noise from a 150
Ω source
Output noise:
No channel assigned:
Master Fader at 0dB:
-94dBu => s/n 100dB *
Master Fader closed:
-96dBu => s/n 102dB *
6 channels assigned, master fader at "0":
Channel fader closed:
-84.5dBu => s/n 90.5dB *
Channel fader at 0 :
-80.8dBu => s/n 86.8dB *
* s/n = signal to noise ratio at nominal output level, with 18dB respectively 20dB of headroom
INPUTS
MIC/LINE INPUT
Input type:
electronically balanced, transformer-less
Input Impedance:
6.8k
Ω linear from 22 Hz to 22 kHz, 4kΩ with pre- LF Cut,
RF Filters:
optional
Pre-LF Cut:
passive filter, 135Hz 6dB/octave
Sweep LF Cut:
active filter, adjustable from 25 to 350Hz, 12dB/octave
Microphone powering:
+48V [phantom power]
RETURN INPUT
Input type:
electronically balanced, transformer-less
Sensibility:
adjustable from – 6dBu to +25dBu
Return impedance:
18k
Ω