Smithco Envizio Pro Quick Reference Guide - Manual (Page 9)

8
Guidance Screen
The Guidance screen is the main screen viewed during product application.
1. The On-Screen Light Bar is displayed along the top of the Guidance screen.
Settings for the light bar may be found by selecting:
2. The Tank or Bin Indicator displays the calculated volume of product remaining
in the tank or bin. Touch this indicator to display the Tank or Bin Volume
Configuration screen.
3. The Area Covered displays a tally of the total area covered by active sections
(sections toggled on) within the current job.
4. The GPS Status status indicator displays the status of GPS reception and the
currently selected correction source on the Guidance screen. See the “GPS
Status Indicator” section on page 2 for more information.
5. Touch the Display Mode icon to toggle the day or night modes for the guidance
screen display.
6. This area displays the Speed or Course Over Ground (COG) . Touch this area
to toggle the information displayed.
7. The Distance to Swath display shows the distance and direction to the
displayed Guidance path.
8. The SmarTrax Status is displayed if an optional SmarTrax or SmartSteer
system is connected to the field computer. This indicator appears green if the
system is engaged or red if the system is disengaged.
If the CAN SmarTrax or SmartSteer node is installed, the SmarTrax engage/
disengage icons will be displayed in the lower, right corner of the guidance
display. Refer to the SmarTrax and SmartSteer Installation and Operation
Manual for more information.
1
7
11
9
12
8
10
2
3
5
4
13 14
6
15 16 17 18 19
SmarTrax
Engage
Tools Menu
Computer
Menu
Display