Smithco Diesel Super Rake 17-001 Accessories Manual - Manual (Page 94)

C-39
Rear Attachment
43-008 DRAG MAT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HB-716-14-125 Bolt, 7/16 - 14 x 1-1/4 4
HW-716 Washer, 7/16 4
HNTL-716-14 Lock Nut, 7/16-14 4
2 13-751 Right Carrier Mount 1
3 19-605 Drag Mat Chain 1
HHP-18 Bridge Pin, 1/8 1
4 19-601 Steel Drag Mat 1
5 13-752 Left Carrier Mount 1
INSTRUCTIONS
1. The Drag Mat Kit can be installed on all Super Star with or without the optional Roll Bars.
2. WITH ROLL BARS: If your machine is equipped
with Roll Bars, remove the outside two bolts from the roll
bar mounts. Install the flat washers and secure right and
left carrier mounts (see picture. Tighten all hardware.
3. WITHOUT ROLL BARS: If your machine is not equipped
with a roll bar the carrier brackets will bolt directly onto
the roll bar support plates (see picture). Using the hard-
ware provided, tighten the right and left carrier mounts to
roll bar plates.
4. Install the tow hitch insert into the quick hitch. This is
where the tow chain on the drag mat attaches to the
machine.