Smithco Diesel Super Rake 17-001 Accessories Manual - Manual (Page 92)

C-37
Rear Attachment
43-043 FINISHING BRUSH KIT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 13-682 Brush, 77 x 11 1
2 13-683 Brush Track 1
3 HB-14-20-075 Bolt, 1 /
4
- 20 x 3 /
4
8
HNFL-14-20 Flange Whiz-Lock Nut, 1 /
4
- 20 8
4 13-688 Brush Channel 1
5 43-041 Mount Bracket 2
6 HB-14-20-250 Bolt, 1 /
4
- 20 x 2 1 /
2
4
HNFL-14-20 Flange Whiz-Lock Nut, 1 /
4
- 20 4
INSTALLATION INSTRUCTIONS
1. Remove the mesh finisher from your unit, it will not be used with the brush.
2. Place the brush (Ref 1) into the brush track (Ref 2). Place the brush channel (Ref 4) between the brush
track and the mounting brackets (Ref 5). Now bolt the mounting brackets (Ref 5) to the brush track using
the
1 /
4
- 20 x 3 /
4
" bolts and 1 /
4
- 20 flange whiz-lock nuts (Ref 3).
3. Four holes need to be drilled into the frame of the Flex Action Finisher to mount the brush. Drill two
Ø 9 /
32
holes 23" in from each end and 3" apart (see Reference drawing).
4. Mount the brush assembly to the frame using the four 1 /
4
- 20 x 2 1 /
2
" bolts and 1 /
4
- 20 flange whiz-lock
nuts (Ref 5).