Smart Avi HDR-Ultra - Manual (Page 5)

CONTROLLING THE HDR-ULTRA
There are multiple ways to control the HDR-Ultra:
 Front panel
 SmartControl software
 RS-232 commands
 TCP-IP module (NET-IP-Pro)
FRONT PANEL CONTROL
The HDR-ULTRA Front panel enables one to switch directly
from the Matrix without the use of any software.
Its LCD (40x4) offers detailed information about the status of
the switch at any given moment.
To assign an output to an input, press SWITCH. A blinking
block cursor will appear. Use UP and DOWN to select the input
that you would like to assign. Once the cursor is over the de-
sired input port, press ENTER to enter editing mode. Press UP
and DOWN to select the output port. Once you have selected
an output, press ENTER to save the configuration. To escape
from editing mode, press ESC.
5