Smart Avi HDR-Ultra - Manual (Page 4)

HARDWARE INSTALLATION
1. Turn off all input devices and displays.
2. Connect the HDMI cables from the input devices and
to the “IN” ports on the HDR-ULTRA matrix.
3. Connect the HDMI cables from the HDMI port of the
HDX-Ultra Receivers to the HDMI displays.
4. Connect the RJ-45 port of each HDX-Ultra Receivers to the
respective “OUT” ports on the HDR-ULTRA using CAT5e/6
cables.
5. Power on the HDX-Ultra Receivers by plugging in their
power adapters (5VDC2A).
6. Connect the power cord and power-on the HDR-ULTRA.
7. Power on the input devices and the displays.
4
APPLICATION DIAGRAM