Smart Avi CATSwitch - Manual (Page 20)

20
www.smartavi.com
Network Setting Menu
The network setting menu allows you to assign a static
IP address to the SMTCP-2. It is recommended that
you statically assign an IP address to avoid any future
conflict or connectivity issues with DHCP.
Device Config Menu
The device configuration menu allows you to select the type of matrix you are using, specify
the dimensions of the matrix, and assign names to the inputs, outputs and presets, reset the
names and reset the system to factory defaults.
To begin, set the type of device you are using from the drop-down menu labeled Device Type
and specify the Matrix Dimensions. After specifying the Matrix Dimensions, press the Submit
button to make the changes.
Once the type of matrix is entered, you can assign names to each of your inputs, outputs and
presets. The preset names are used in the Matrix Menu for quick storage and retrieval of matrix
configurations. Leaving a preset blank will exclude it from the Matrix Menu.
Controlling the CATSwitch with the SMTCP module (continued)