Smart Avi CATSwitch - Manual (Page 15)

15
www.smartavi.com
Controlling with IR
Switching Ports with Remote Control
You have the option of controlling the CATSWITCH via Remote Control. The remote is used to control the CATSWITCH.
The SM-EYE must be connected to the CATSWITCH ( this is an optional connector not always available in all boxes) in
order to interface the remote control with the matrix. The way the remote control the matrix is as follows:
Xxyy
When XX is the output , YY is the input
To change the routing of the signals,
For example, to set output 3 to input 2 press “0” + “3” + ENTER, then press “0” + “2” + ENTER. If a wrong button is
pressed, the user must either press the ESC button or wait 5 seconds before restarting the sequence.
Software Operation (continued)