Smart Avi QuadKVM - Manual (Page 7)

7 www.smartavi.com
Dual-Mode - For Dual-Mode, press PiP and FULL at the same time, then
press 1/2/3/4 for the left source computer and 1/2/3/4 for the right source
computer.
1 2
Quad-Mode - For Quad-Mode, press QUAD. To select the source computer
for keyboard and mouse control, press 1/2/3/4 on the front panel.
1 2
3 4
The QuadKVM operates in much the same way as a conventional KVM. To view and control any
input, simply press the corresponding button on the front of the QuadKVM. For example, press 1
for the first input, 2 for the second input, and so on. The LED lights will change accordingly.
The first time you connect a display to the QuadKVM, you will need to set the output resolution to
that of your display. To change the resolution, press MENU and 2/3 at the SAME TIME.
The corresponding resolutions are as follows:
Menu+2 - UXGA 1920x1080
Menu+3 - WUXGA 1920x1200
Front Panel Operation
Setting the Resolution
FullScreen Mode - For Fullscreen Mode, press FULL. To select the source
computer for keyboard and mouse control, press 1/2/3/4 on the front
panel.
1
PiP Mode - For Picture-in-Picture Mode, press PiP. To select the source
computer for the main display and keyboard and mouse control, press
1/2/3/4 on the front panel.
1
2
3
4
QuadKVM Front Panel
Buttons and Indicators
In addition to the standard KVM functions, the QuadKVM is capable of displaying several
inputs at a time with different modes of operation. To switch to a particular mode, simply
press the the corresponding button on the front of the QuadKVM. The available modes are
defined as follows:
To display the system information, press MENU and PiP at the SAME TIME. To exit press MENU.
To reset the QuadKVM to its factory default settings, press MENU, QUAD and FULL at the SAME TIME.