Sim2 MICO 50 - Manual (Page 54)

MiCO 50
16
Projection from behind the screen
Projecting a Reversed/inverted image
Place a translucent screen between the projector and the audience. n
Reverse the image by setting “Floor Rear” for “Orientation” in the n
“Image” menu.
Projection using a mirror
Place a mirror (normal flat type) in front of the lens. n
Reverse the image by setting “Floor Rear” for “Orientation” in the n
“Image” menu, when the mirror is placed on the side where the
audience is.
info When using a mirror, be sure to carefully position •
both the projector and the mirror so that the light
does not shine into the eyes of the audience.
Ceiling-mount setup
It is recommended that you use the optional ceiling-mount bracket n
for this installation.
Before mounting the projector, contact your nearest Authorized n
Service Center or Dealer to obtain the recommended ceiling-
mount bracket (sold separately).
Be sure to adjust the position of the projector to match the n
distance (Z) from the lens center position to the lower edge of the
image, when mounting the projector on the ceiling.
Invert the image by setting “Ceiling” for “Orientation” in the “Image” n
menu.
When using the default setting.
q On-screen Display
The image is reversed.
When using the default setting.
q On-screen Display
The image is reversed.
When using the default setting.
q On-screen Display
The image is reversed.