Sim2 MICO 50 - Manual (Page 50)

MiCO 50
12
Using the Adjustment Feet
The height of the projector can be adjusted using the •
adjustment feet when the surface the projector is
placed on is uneven or when the screen is slanted.
The projection of the image can be made higher by •
adjusting the projector when it is in a location lower
than the screen.
If the screen is at an angle, the adjustment • feet can be
used to adjust the angle of the image.
Adjustment feet
note
When the height of the projector is •
adjusted, the image may become
distorted (keystoned), depending on
the relative positions of the projector
and the screen. See page 24 for
details on keystone correction.
info When lowering the projector, be •
careful not to get your finger caught
in the area between the adjustment
foot and the projector.
Using the lens shift
The height and width of the projected image can be
adjusted to be within the shift range of the lens by
motorized control at the lens shift on main menu.
note
In Setup menu, select Lens Shift •
Function.
When moving the lens, if the projected •
image remains still, turn the remote
key in reverse direction.