Available format conversions – Sierra Video UDC-163 User Manual
Page 8
Page 8 of 31
UDC-163 User Manual
(V 1.2)
Four copies of SD analog composite and SD-SDI are generated and sent to four, 2x1 switches (S7, S8,
S9, S10) that allow the user to select either analog composite or SDI for the outputs (BNCs 7, 8, 9, 10).
Available Format Conversions
The UDC-163 has extensive re-format and down conversion capabilities. It can act as a
downconverter, ARC and frame rate converter. The format conversions are listed in the chart below.
Table 1. Supported format conversions
From To
SD
1080 sF 23.98
486 i 29.97
1080 p 23.98
486 i 29.97
1080 sF 24
---- none
1080 p 24
---- none
1080 i 25
575 i 25
1080 p 25
575 i 25
1080 i 29.97
486 i 29.97
1080 p 29.97
486 i 29.97
1080 i 30
---- none
1080 p 30
---- none
720 p 25
575 i 25
720
p 29.97
486 i 29.97
720
p 30
---- none
720 p 50
575 i 25
720 p 59.94
486 i 29.97
720 p 60
---- none
486 i 29.97
486 i 29.97
575 i 25
575 i 25
Notes:
1. All rates translated to effective frame rates, interlaced rates “ i ” are two times the number shown.
For example, i 29.97 is 59.94 fields per second (two fields per frame thus the interlaced frame rate
is 29.97); but progressive “ p ” 29.97 is 29.97 frames per second.
2. SD active line rates are PAL (575) and NTSC (486).
3. The UDC-163 cannot accept native 720 p23.98 or sF23.98, however it can convert those signals if
they are delivered inside a p59.94 transportation wrapper (as typically done with this format) and
processed as p59.94.