Sierra Video UDC-163 - Manual (Page 22)

Page 22 of 31 UDC-163 User Manual

(V 1.2)
Menu Item Parameters Description
Proc Control
Gain Range 0-200 As a percentage
Lift Range 0-200 As a percentage
Saturation Range 0-200 As a percentage
Phase Range 0-360 In degrees
Background Color
Hue
Range 0-360
Adjusts background hue
when scaled image size is
less then the active video
size
Background Color
Saturation
Range 0-100
Adjusts background color
when scaled image size is
less then the active video
size
Background Color
Value
Range 0-255
Adjusts background value
when scaled image size is
less then the active video
size
Composite
Output
Oversampling
On Turn on/off encoder
oversampling of the
composite output video
Off
Color
On Turn on/off color on the
analog/composite output
channels
Off
Color Bars
On Turn on/off color bars on
the analog/composite
output channels
Off
Miscellaneous
Reference
Off Turn off reference or
select which reference to
use
Reference 1
Reference 2
Reference
Alignment Percent Input signal and
reference signal
Reports the alignment
percentage of the input
video and reference input
SD Vbit Correction
Enable If enable V-bit will
always be on line 20
Disable
Save Settings Save
Save the current device
configuration
Load Settings Same as listed above
Load the previously
saved device
configuration
Load Factory
Defaults
Same as listed above
Load factory defaults.
Note this will replace any
saved settings with the
factory defaults