Sierra Video ADC-142 - Manual (Page 20)

Page 20 of 29 ADC-142 Owner’s Manual •••• (V 2.1)
Menu Item Format Description
Frame Sync
Framesync Enable On/Off
Enables the Frame Sync
Horizontal Offset 0-4125 samples
Applies additional
horizontal offset
Vertical Offset 0-1124 lines
Applies additional vertical
offset
Minimum Latency
Lines
3-1124 lines
Selects the minimum lines
of latency allowed.
Minimum Latency
Fields
0-27
Selects the minimum
fields of latency allowed.
Framesync Status On/Off/Error Shows the status of the FS
Reset Framesync Confirm
Resets the FS and its
buffers. Re-establishes
audio video sync after a
adjusting the horizontal
and vertical offsets.
Menu Item Format Description
AES Audio
Out 1/2 - 7/8
Source
(per channel)
AES 1-16 Selects the source for the
AES outputs. Each AES
source can be chosen
separately.
Analog 1-8
Silence
Gain
(per channel)
Range (-400) - 400
Gain applied to AES
audio output.
Phase
(per channel)
Normal
Inverts the phase of the
AES audio output.
Invert
Menu Item Format Description
Tone
Generator Tone Generator 1-4
Frequency
Range 50Hz –16KHz
Selects the frequency of
the tone generated.
Menu Item Format Description
Presets
Parameter Save Confirm
Saves the parameters as
preset.
Parameter Load Confirm
Loads parameters
previously saved.
Restart Parameters
to Factory Default
Confirm
Will load factory presets
and overwrite the save.