Sierra Video ADC-142 - Manual (Page 19)

ADC-142 Owner’s Manual •••• (V 2.1) Page 19 of 29
Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGear TM frames and controller
cards from a computer. The DashBoard software and manual can be downloaded from the Sierra Video
Systems website (www.sierravideo.com).
Using the Menus and Menu Descriptions
You must first install the DashBoard Control System software on your computer. Refer to the
DashBoard User Manual for software installation procedures and for using the DashBoard interface.
The following pages list the parameters from the menu tabs available in the DashBoard software when
connected to a ADC-142.
Menu Item Format Description
Card Info
(Read-only)
Product ADC-142 The product name
Manufacturer
Sierra Video Systems The manufacturer of the
product
Software Release
Number ### The release number of the
firmware in this card
Software Build
Date ### The internal build number
of this software
Software Build
Time ### The date and time the
software was created
+12 V Power Rail #.## W Positive Supply Power
-7.5 Power Rail #.## W Negative Supply Power
Video Input
Standard
############
Detected Video Standard
on SDI or Analog Input
Reference Standard ############
Detected standard of
selected reference.
SSN ############
Displays the Silicon Serial
Number of the card.