Appendix-ii – Sensoray 2411 User Manual

Page 10

Text mode
Original mode

Appendix-II:

Instruction to Enable Hard Drive

(for Sensoray 24xx only)

1. Install Sensoray’s model 300TA, connect IDE flat cable and power cable to the hard drive.
2. The IDE driver is not loaded automatically by default, because normally hard drive is not installed on

the system.

3. Hard drive should be mounted BEFORE using it.
4. Under /usr/etc, open “services” file using any editor. For example, “vi /usr/etc/services”.
5. Add “mount /dev/hda1 /media/hda1” in the file.

Example:

mount /dev/hda1 /media/hda1

modprobe bttv card=73 pll=1
sleep 5

6. Restart 24xx