Dynex DX-CRMN1 - Manual (Page 8)

8 Using your card reader
Caution: Formatting a memory card permanently deletes all files on
the card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
Formatting a memory card (Macintosh)
If your computer has trouble recognizing a new memory card, format the
memory card in your device or by using the computer.
To format a memory card:
1 Click Go, then click Utilities.
2 Launch Disc Utility.
3 In the left-hand column, select the memory card you want to
format, then click the Erase tab.
4 Specify a volume format and name for the memory card, then
click Erase. A warning box opens.
5 Click Erase again. The Erase process takes a minute or so to erase
and reformat your memory card.
Caution: Formatting a memory card permanently deletes all files on
the card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
DX-CRMNI_11-0401_MAN_V6_English.fm Page 8 Monday, May 23, 2011 3:33 PM