Daewoo DF-4501P - Manual (Page 8)

INTRODUCTION
9
Selects a subtitle language, if available.
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Displays the edit menu for DVD+RW/+R discs or sets a chapter marker.
Enlarges the DVD video image.
8
Identification of Controls
Remote Control
Turns the DVD Recorder+VCR on and off.
- Opens and closes the disc tray in DVD mode.
- Ejects the tape in the VCR deck in VCR mode.
Switches the DVD Recorder+VCR input to TV tuner, AV1, AV2, FAV or DV.
Selects DVD mode.
Selects VCR mode.
Displays or exits the Setup menu.
Displays information about the currently loaded disc, VHS tape, or TV
channel.
VCR: Commercial Skip skips forward 30 seconds.
Confirms menu selections.
- œ √…† : Selects menu options.
- PR(+/–) : Selects channels.
Accesses DVD disc menus.
- Selects numbered options in menus.
- Selects TV channels.
- Manually adjusts tracking.
Resets the tape counter in VCR mode.
- DVD: Searches backward/forward.
- VCR: Rewinds/advances during Stop mode. Press during Play mode for
fast reverse/forward picture search.
Press and hold for 3 seconds to switch between Progressive Scan and
Interlace Scan mode.
Front Panel Display
Channel
Identification of Controls
PR23 TV Channel
Input mode
Au-1 AV1 input Au-2 AV2 input
F-Au Front AV input DV DV input
Copy
COPY DVD to VCR copying COPY VCR to DVD copying
Recording on disc
1 1 : 1 5 Indicates a DVD Timer recording is set. 1 1 : 1 5
Indicates a DVD Timer Recording is in
standby mode.
R E C Indicates the DVD is recording.
RECP Recording Pause mode
0:30 OTR Recording mode
Recording on tape
1 1 : 1 5 Indicates a VCR Timer Recording is set. 1 1 : 1 5
Indicates a VCR Timer Recording is in
standby mode.
R E C Indicates the VCR is recording.
RECP Recording Pause mode
0:30 OTR Recording mode
Others
SAFE Indicates when the DVD Recorder+VCR is locked.
TV
Indicates the DVD Recorder+VCR is in
TV mode (set by [TV/VCR] button).
VCR
Indicates the DVD Recorder+VCR is in
VCR mode (set by [TV/VCR] button).
I-S
Indicates when the DVD Recorder+
VCR is outputting the video signal in
Interlaced Scan mode.
P-S
Indicates when the DVD Recorder+ VCR
is outputting the video signal in
Progressive Scan mode.
DV model only