Sea Eagle RazorLite Kayaks (393RL RazorLite, 473RL RazorLite) User Manual

Page 9

PRO TIP: One shaft

section has holes for

feathering. By feather-

ing the paddle, the

blades are offset from

each other so that

when one blade is in

the water, the other is

at an angle to slice

through the wind with

little resistance.

Floor Drains

Make sure that the floor

drains are closed with

the caps tightened.

The drains should not

be open while on the

water.

Tall Back Seat

The TBS is made of

thermal molded foam.

Featuring a storage

pouch on the back with

built in zipper, the TBS

provides great lumbar

support with an 18"

high back rest.

Using the seat straps,

clip each strap to the D-

rings. The upper straps

attach to the forward D-

rings.

TIP: When getting in

the kayak, place your

weight on the seat pad

and try not to knock

back the upright back-

rest pad. Arch your

lower back forward and

avoid leaning high on

the back of the seat.

You will feel the seat

support your lumbar re-

gion.

Footrest

Slide clips onto the

strap. Insert free end

up through the center

of the buckle and down

through the front slot

making a foot long

loop. Slide the tube

onto the strap. Clip to

the D-rings. Adjust for

comfort. Trim excess

with a scissor. Melt

edge to keep it from

fraying.

Seating Positions

Shown below are the seating arrangements for the 393RL

and 473RL. The 473RL can be paddled solo or tandem

(boats not shown to scale).

SeaEagle.com/Instructions

RazorLite 393RL

RazorLite 473RL

w/solo paddler