Sea Eagle RazorLite Kayaks (393RL RazorLite, 473RL RazorLite) User Manual

Page 10

DEFLATION

CAUTION! Air comes

out with force.

To deflate, push the

valve stem down and

turn it a quarter turn to

the right. The stem will

stay in the down posi-

tion allowing air to es-

cape.

Fold one wall over the

other. Push the floor

over until the skeg base

is up. Make a fold be-

tween the drains and

the skeg base. This will

keep the skeg base flat.

Keep folding until the

bow is almost reached,

then lift the edge and

fold the bow under.

Slide the narrow end of

the boat into the back-

pack bag. Folding the

473RL requires more

folds than shown here

and there will be less

room in the bag for ac-

cessories.

Backpack Carry Bag

Slide the seat in with

the boat. The paddles

and pump will fit along-

side the boat in the

Backpack bag.

CLEANING & PROTECTING

Dry after each use to avoid mold. While washing or rins-

ing: close the valves and twist the caps on so water

cannot not enter the chambers. Sea Eagles can be

cleaned very effectively with general purpose cleaning

products and a scrub brush.

Water collects under the sides of the floor of the Razor-

Lites. To drain, elevate the front so water runs down and

collects in stern. Turn boat over and lift the back so water

spills out. Towel dry the lowest areas.
Protection from the Sun and Heat

Avoid leaving it in direct sunlight when ashore. Tempera-

tures on a beach, dock, davit, etc., can get very high which

could affect the vinyl or glue. Excessive exposure to sun

and heat can cause your Sea Eagle to become sticky or

cause the glue to fail.

Cleaner & Protectant

UV protectant such as

303 Aerospace Protec-

tant, should be applied

to the vinyl every 3-5

weeks. Protectant pre-

serves the vinyl and

makes it easier to keep

the Sea Eagle clean.

3M Marine Cleaner and

Protector combines

cleaning and sun pro-

tection.

RazorLite Kayaks |

DEFLATION, CLEANING & PROTECTION