Sea Eagle NeedleNose SUP (NN116, NN126, NN14) User Manual
Page 8
Press the ON button to
begin inflation. The
pump operates in two
stages which can be
identified by the noise of
the turbine at the start,
followed by the piston.
The pump automati-
cally stops once the
pressure is reached.
Air compressors that
are designed for other
uses like tire inflation
(usually around 50 PSI)
can easily harm your
Sea Eagle. We only rec-
ommend using Sea
Eagle pumps.
Locate a relatively clean
area that is free of
sharp objects. Unpack
the board from its bag
and lay it out flat.
A large removable skeg
is included with your
NeedleNose for im-
proved tracking. Make
sure that the key lock is
in the out position of the
skeg (as pictured) be-
fore sliding the skeg into
the base.
Slide the skeg into the
skeg base underneath
the stern.Then slide the
key lock into the small
gap in the base to lock it
into place.
Insert the pump hose
with the recessed valve
adapter into the valve
and turn clockwise to
lock in place. Begin
pumping in air.
The pressure gauge will
not begin to register
until the board begins to
get pressurized. Pump
until the working pres-
sure of between 12 and
14 psi is reached.
Do not exceed 15 PSI.
Deluxe Inflatable Seat
(OPTIONAL)
The Deluxe Kayak Seat
(DKS) has two internal
bladders, two white
valves and two blue
straps with clips for se-
curing to the D-rings.
7
INFLATION: VALVES & PUMPS (continued)
ASSEMBLY & INFLATION