Sea Eagle NeedleNose SUP (NN116, NN126, NN14) - Manual (Page 6)

Recessed Air Valves
Remove the cap and
press and turn the valve
stem counterclockwise
so that the stem is in
the UP position. When
the stem is in the up po-
sition the valve will re-
tain air. Turning the
stem clockwise will put
the valve in the down
position for deflation.
The working pressure
for your Sea Eagle
NeedleNose is between
12-15 PSI.
NOTE: Do not exceed
15 PSI when inflating.
SUP Pump
This T-handle pump has
been matched to the
board to provide rapid
inflation and ease of at-
taining the working
pressure. The pump
comes with mesh bag,
manometer (pressure
gauge) and a hose.
Carefully insert
manometer (pressure
gauge) into handle and
twist until upright.
Insert the hose with the
recessed valve adapter
into the manometer and
twist to lock it in. Hold
the manometer when
twisting the hose. The
recessed valve adapter
end is shown below.
When ready to inflate,
insert the adapter and
twist to lock into the
valve.
BTP Turbo & BP12
Electric Pumps
(OPTIONAL)
These electric pumps
comes with a nylon
shoulder carry bag, 12V
DC power supply, hose
and adapters.
Included are a cluster of
seven valve adapters,
with raised numbers on
each arm of the cluster.
The adapter marked
number 1 is the only
adapter needed for your
Sea Eagle.
5
INFLATION: VALVES & PUMPS