Scotsman MDT6N90 - Manual (Page 17)

SENSOR MAINTENANCE
1. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
2. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the ice chute, and wipe
them clean.
MDT6N90
May 2001
Page 17
SLIDE SENSORS
UP TO REMOVE
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.