Scotsman IS160 - Manual (Page 4)

FOR THE INSTALLER
1. Locate the Ice Station on the counter.
Allow vertical clearance above unit for the
removal of the cover, and for pouring ice
into the hopper.
2. Plan the unit drain. Two tubes ( 5 ⁄
8
" and
1 1 ⁄
4
" I.D.) are required for draining.
Routing is either thru the back or base.
Sufficient fittings are indluded with the
unit to install in most cases.
3. In order to comply with National
Sanitation Foundation (NSF)
requirements, this unit must be either
elevated above the counter top
sufficiently to provide space for cleaning
under the unit or sealed to the counter
top.
Elevating the unit may be accomplished
by using the legs. They will screw into
threaded holes in the base of the unit. CABINET DRAIN
TUBES
IS160 and IS220
August 1995
Page 4