Hd150, Installation: ice machine – Scotsman HD150 User Manual
Page 4
Installation: Ice Machine
Check that gasket tape has been placed at the
outside edge of the dispenser top.
There is no thermostat to install. Place the ice
machine (CME306 or CME456) onto the top of the
HD150. The ice machine will sense when ice
builds up into its cube port and shut off. It
automatically restarts when that ice is removed.
Follow all instructions for installation of the ice
machine.
Drain
HD150
May 2000
Page 4
This manual is related to the following products:
See also other documents in the category Scotsman Equipment:
- Prodigy Plus D Series (23 pages)
- C1030 (23 pages)
- Prodigy Plus D Series Remote Condenser Modular Cuber (26 pages)
- N1322 (54 pages)
- DC33 (26 pages)
- C1848 (22 pages)
- C2148W (25 pages)
- C2148R (26 pages)
- CU3030 (104 pages)
- EH430 D (31 pages)
- N1322 (24 pages)
- N1322 (18 pages)
- N1322L (18 pages)
- AFE424 (15 pages)
- AFE400 (25 pages)
- C2648R (25 pages)
- CU0920 (17 pages)
- CU0920 (31 pages)
- CB1030 (43 pages)
- CU3030 (18 pages)
- CU50 (16 pages)
- FME804 Installation (16 pages)
- FME804 Installation (32 pages)
- NB1322 (37 pages)
- HD30 (18 pages)
- HID540 Service Manual (41 pages)
- HID540AW (20 pages)
- MDT4F12 (16 pages)
- SCCP30 (15 pages)
- SCCP30 (30 pages)
- SCN60 (38 pages)
- SCN60 (18 pages)
- MDT5N40 (16 pages)
- TDE650 (33 pages)
- SCR33 (20 pages)
- ECC1800 (4 pages)
- SCCP50 (33 pages)
- SCV32 (16 pages)
- 2000 Prodigy Eclipse (50 pages)
- EH222 with ECC (57 pages)
- Nugget Ice Machines (22 pages)
- CME650 (24 pages)
- CD200 (19 pages)
- CME1656 (43 pages)
- CME456 (42 pages)