Scotsman CSW45 - Manual (Page 16)

Vacation and Moving Care
To shut down the ice maker:
1. Unplug ice maker or disconnect power.
2. Remove all ice from storage bin.
3. Shut off the water supply.
4. Remove the two screws in the lower access panel
and the two screws from the base grille area of the
front panel support. Pull forward to remove the lower
access panel.
5. Disconnect the inlet and outlet lines to water
valve. Allow these lines to drain and then reconnect
to the valve.
6. Replace lower access panel and screws. Drain
water from water pan by removing the drain cap.
Also, remove water from drain line.
7. Before using again, clean the ice maker and
storage bin.
8. Plug in ice maker or reconnect power.
NOTE: All components of the ice maker are
permanently lubricated at the factory. They should
not require any additional oiling throughout the
normal life of the machine.
WA so can result in death or
electrical shock.
CSW45
July 1999
Page 16