Scotsman ECC0800 - Manual (Page 3)

Connect electrical power to the wires in the junction box on the side of the unit. A field supplied service
disconnect is recommended. Use caution when mounting the disconnect, do not drill into condenser coils.
Route interconnecting communication wire harness thru access hole and connect to control box. The harness
is included with the condensing unit. One end plugs into the ice making section and the other into the
condensing unit. The system will NOT operate without this harness.
Refrigeration Tubing
Important: Minimize the amount of tubing exposed outdoors.
The line set must be routed between the condensing unit and the ice maker’s location. During the transition
from quick connects to braze connections, the ice maker or line set may or may not have quick connects, use
this chart as a guideline for the proper action based on what is available at the site.
Condensing unit has sweat connections
Ice making head has sweat connections If line set does not have quick connects, route and use as is.
If line set has quick connects, recover refrigerant from line set
and cut all quick connects off.
Ice making head has quick connects If line set has quick connects, recover refrigerant from line set
and cut one end of quick connects off.
If line set does not have quick connects, must use KTE6-EH
stub kit to add for ice machine end.
In all cases the line set will need to be shortened to fit.
Do NOT leave excess line set exposed outdoors, especially on a roof.
Line Routing:
• Allowed: One rise after a drop.
• Allowed: One drop after a rise.
• Not Allowed: More than one rise after a drop
• Not Allowed: More than one drop after a rise.
Model Voltage Minimum
Circuit
Ampacity
Maximum
Fuse Size
System
Charge
Cabinet Size
w x d x h
ECC0800-32 208-230/60/1 14.8 20 192 32 x 39 x 39.75
ECC0800-3 208-230/60/3 10.6 15 192 32 x 39 x 39.75
ECC1200-32 208-230/60/1 17.8 20 224 32 x 39 x 39.75
ECC1410-3 208-230/60/3 9.1 15 224 32 x 39 x 39.75
ECC1410-32 208-230/60/1 14.5 20 224 32 x 39 x 39.75
ECC1800-3 208-230/60/3 19.0 20 232 32 x 39 x 39.75
17-3456-01