beautypg.com

How to remove scale from the ice making system, Scn60 user's manual – Scotsman SCN60 User Manual

Page 14

background image

How to remove scale from the ice making system.

Cleaning this machine involves adding a solution of
scale remover and water to the ice machine and
continuing to add it as it makes ice. The scale
remover must be diluted to the correct ratio. A
squirt bottle will make adding the scale remover
much easier when the unit is built in. If not built in,
remove the top panel for reservoir access.

Recommended tools: Rubber gloves, squirt bottle
& scale remover. Pre-Mixed 16 oz squirt bottle of
scale remover is part number 19-0664-01.

1. Scoop out and discard all of the ice.

2. Press and release the On/Off button.

3. Open door and locate screws at upper back wall
of bin. Remove the two screws.

4. Remove the back panel of the bin by lowering it
down past the scoop holder, feel free to rotate the
scoop holder loop down to make more room.

5. Push tab on front edge of reservoir cover and
remove the cover. Note: Adjacent wires are low
voltage and are not hazardous.

May 2011

Page 13

SCN60
User's Manual

Ice

Making

Check
Water

Time to

Clean

Clean
Reset

Push Tab

Screws

Reservoir Cover
Release Tab

Float Valve
On/Off Lever

Lift Reservoir Cover to Remove

Ice

Making

Check
Water

Time to

Clean

Clean
Reset

This manual is related to the following products: