Hd22 and hd30, Adjustments – Scotsman HD22 User Manual
Page 16
Adjustments
The dispenser is preset at the factory. Adjustments
are rarely needed.
Agitation Time Recommendations:
The standard time is 3 seconds on every 6 hours.
Adjust to agitate more frequently if the unit is
installed in a low temperature environment.
However, if the ice being produced by the ice
machine is cloudy and crumbles easily, adjust to
agitate less frequently.
HD22 and HD30
November 2011
Page 15
Agitation Timer, Shown Pre-set to 3 seconds
every 6 hours
Water Flow Adjustment Screw
This manual is related to the following products:
See also other documents in the category Scotsman Equipment:
- Prodigy Plus D Series (23 pages)
- C1030 (23 pages)
- Prodigy Plus D Series Remote Condenser Modular Cuber (26 pages)
- N1322 (54 pages)
- DC33 (26 pages)
- C2148W (25 pages)
- C1848 (22 pages)
- C2148R (26 pages)
- CU3030 (104 pages)
- EH430 D (31 pages)
- N1322 (24 pages)
- N1322 (18 pages)
- N1322L (18 pages)
- AFE424 (15 pages)
- AFE400 (25 pages)
- C2648R (25 pages)
- CU0920 (17 pages)
- CU0920 (31 pages)
- CB1030 (43 pages)
- CU3030 (18 pages)
- CU50 (16 pages)
- FME804 Installation (32 pages)
- FME804 Installation (16 pages)
- NB1322 (37 pages)
- HID540 Service Manual (41 pages)
- HID540AW (20 pages)
- MDT4F12 (16 pages)
- SCCP30 (15 pages)
- SCCP30 (30 pages)
- SCN60 (18 pages)
- SCN60 (38 pages)
- MDT5N40 (16 pages)
- TDE650 (33 pages)
- SCR33 (20 pages)
- ECC1800 (4 pages)
- SCCP50 (33 pages)
- SCV32 (16 pages)
- 2000 Prodigy Eclipse (50 pages)
- EH222 with ECC (57 pages)
- Nugget Ice Machines (22 pages)
- CME650 (24 pages)
- CD200 (19 pages)
- CME1656 (43 pages)
- CME456 (42 pages)