Scotsman CU0415 - Manual (Page 3)

User Manual for Models CU0415, CU0715 and CU0920
July 2013
Page 2
Important Details
The machine is designed for use indoors in a
controlled environment. It must be kept dry, not
overheated or subjected to excessive cold. The water
and power supply must be maintained or the machine
will stop making ice.
There are limits to how hot or cold the room it’s in can
be.
• Minimum air temperature: 50 o F or 10 o C
• Maximum air temperature: 100 o F or 38 o C.
There are also limits to how hot or cold the water
supply can be:
• Minimum water temperature: 40 o F or 4.5 o C
• Maximum water temperature: 100 o F or 38 o C.
There are limits to the voltage supply to the unit,
voltages vary by model:
Voltage
115 (-1)
Minimum 104
Maximum 126
Water supply must be potable by the localities
definition.
There are limits to the water pressure supplied to the
unit:
• Maximum pressure. static: 80 psi or 5.5 bar
• Minimum pressure, dynamic: 15 psi or 1 bar
A drain will be needed for melted ice and rinse water.
Warranty:
The warranty statement for this product is provided
separately from this manual. Refer to it for applicable
coverage. In general warranty covers defects
in material or workmanship. It does not cover
maintenance, corrections to installations, or situations
when the machine is operated in circumstances that
exceed the limitations printed above.
This is a commercial model, if installed in a residence
some commercial service companies may not be able
to service it on site.
The manufacturer has designed and produced this
machine with the finest in materials. The manufacturer
assumes no liability for units that have been altered in
any way. Alterations or part substitutions will void the
warranty. Specifications and designs are subject to
change without notice.
Options:
There are two floor mounting kits available:
• KUFM15: for 15” models
• KUFM20: for 20” model