Royal Vacuums CH50102 - Manual (Page 10)

3. tools
3.1
A. Upholstery nozzle may be used for upholstered
furniture, draperies, mattresses, clothing,
automobile interiors, and carpeted stairs.
B. Crevice tool may be used in tight spaces,
corners and along edges in such places as dresser
drawers, upholstered furniture, stairs and
baseboards.
seleCt proper tool
10
Tools allow for cleaning surfaces above the floor and for
reaching hard to clean areas.
The vacuum is ready for tool use when handle is in
upright position.
IMPORTANT
Brushroll continues to turn while product is turned on
and handle is in upright position. To avoid damage to
carpet, rugs, furniture and flooring, avoid tipping
cleaner or setting it on furniture, fringed area rugs, or
carpeted stairs during tool use.
3.1
A
B
CleaninG liGhtweiGht
FlexiBle ruGs
2.12 Stand on one end of
rug and move cleaner
toward other end or edge.
Before reaching edge,
push down on handle.
This will lift up the nozzle
(front of cleaner) as shown
and will prevent rug from
clinging to cleaner.
Continue to lift up nozzle
so that when you have
reached the edge, it is
completely off the rug.
Move cleaner back to start
again, lower nozzle, and
use only forward strokes.
Cord storaGe
2.11 Wrap cord around
cord hooks (A & B) for
convenient storage.
Attach the plug end to
cord.
Carpet heiGht adjustMent (Cont’d)
For Models with autoMatiC heiGht adjustMent
2.10 The brushroll automatically adjusts for any carpet
or hard surface. The DUAL wheel stabilizing system,
located on the underside of the nozzle, adjusts the
brushroll up and down in order to reach the optimal
setting for the desired floor/carpet type.
2.10
2.11
A
B
2.12